KK3Max \ KK3Pro\Elves2 Pro BT Firmware V5.03 -2025.10.15
“KK3Max-NS39”、“KK3Pro-NS38”、“Elves2 Pro-NS59” BT Firmware V5.03
1. Enable the Switch 2 wake-up feature.
SPECIAL pairing method for wake-up support on Switch 2 :
1.1 Set the controller to Switch mode, then hold the pairing button to enter pairing mode.
1.2 Enter the Controller → Change Grip/Order interface on Switch 2.
1.3 After the Switch 2 displays that the controller has been paired successfully, take off any one of the left and right JOYCON controllers on Switch 2, wait until Switch 2 shows that the JOYCON controller has reconnected, and next install the JOYCON controller back onto Switch 2 to complete the special pairing process.
* Due to the limitations of the Bluetooth chip in the KK3 MAX controller, pairing this controller with the Switch 2 is not as same and convenient as other new controllers like ES. Thanks for your understanding.
Upgrading method：
1. Turn off the controller,use the USB A to USB C cable to connect the controller and your computer.Press Set button in the middle and A button together to turn it into updating mode.
2. Go to computer and click "Update Firmware" and confirm to complete updating.
Note: If no upgrade is needed in the middle, long-press the mode button to turn off the controller, then turn it on again to exit the upgrade mode and resume normal operation.
