GuliKit Elves Pro Controller NS18 NS19 V1.3 firmware

GuliKit Elves Pro Controller NS18、NS19  V1.3 Firmware


1. Add FPS game mode(no any dead zone in stick center), activate by pressing Gear+Capture buttons with a short vibration,close by pressing again with a long vibration.

2. Add new function of quick calibration on gyroscope. When controller is on, place it on tabletop,auto quick calibration can be made on gyroscope by pressing "+,-,A and D-pad Left" at the same time with a vibration after completion. Gyroscope calibration is not needed if there is no issue on it.

3. Fix the direction problem of Motion Sense Aim Assist in firmware V1.2. (NS19 only)





Upgrade Instructions:


1.Turn off the controller,use the USB A to USB C cable to connect the controller and your computer.


2.Hold the APG button and then press A button,a U disk with name of GuliKit will show up in seconds.


3.Download the firmware package and unzip it, copy the corresponding" xxx.bin " file to the U disk, upgrading will be finished automatically  in seconds, the controller will have auto power off and U disk will disappear after upgrading completion.


Note: The controller will auto power off once updating is completed. Don't unplug the USB cable during updating process.
          In case you need to stop updating work,double click the Mode button to turn off the controller to quit updating mode.

          After updating completion,  it is needed to make quick calibration on controller sticks by pressing L, R buttons, Left of D-pad and A buttons together with a vibration indication.

GuliKit    Download    GuliKit Elves Pro Controller NS18 NS19 V1.3 firmware