GuliKit KingKong Controller NS08 NS09 V2.6 Firmware

GuliKit NS08 NS09  V2.6 Firmware

 

1. Add FPS game mode(no any dead zone in stick center), activate by pressing Gear+Capture buttons with a short vibration,close by pressing again with a long vibration.

 

2. Optimize stick algorithm to have faster response.

 

3. When controller is on, auto quick calibration on sticks and ZL/ZR can be made by pressing L,R,A and D-pad Left at the same time with a vibration after completion. No ZL/ZR calibration any more upon restart.

 

4. Add new function of quick calibration on gyroscope. When controller is on, place it on tabletop,auto quick calibration can be made on gyroscope by pressing "+,-,A and D-pad Left" at the same time with a vibration after completion. Gyroscope calibration is not needed if there is no issue on it.

 

Download

 


 

Upgrade Instructions:

 

1.Turn off the controller,use the USB A to USB C cable to connect the controller and your computer.

 

2.Hold the APG button and then press A button,a U disk with name of GuliKit will show up in seconds.

 

3.Download the firmware package and unzip it, copy the corresponding" xxx.bin " file to the U disk, upgrading will be finished automatically  in seconds, the controller will have auto power off and U disk will disappear after upgrading completion.

 

Note: The controller will auto power off once updating is completed. Don't unplug the USB cable during updating process.
          In case you need to stop updating work,double click the Mode button to turn off the controller to quit updating mode.

          After updating completion,  it is needed to make quick calibration on controller sticks by pressing L, R buttons, Left of D-pad and A buttons together with a vibration indication.

GuliKit    Download    GuliKit KingKong Controller NS08 NS09 V2.6 Firmware