GuliKit Elves Pro Controller NS19 V1.1 firmware

GuliKit Elves Pro Controller NS19 V1.1 firmware

 

1. Rewrite the joystick algorithm,Improve the performance of stick with no deadzones.
2. Add the function of auto calibration on stick. When the controller is power on, just press the four buttons of L,R,left of D-pad and A at the same time, the controller will have auto calibration on sticks with a long vibration.
3. Adjust to have less vibration strength for setting and connection indication.
4. Small adjustment on the vibration in gaming, same vibration strength on default level now as original Switch Joy-con.

 

Download

 


 

Upgrade Instruction:


1.Turn off the controller, then use the attached USB cable to connect the controller to PC.
2.Hold the Autopilot button and then press any button of the mode,A/B/X/Y buttons to turn on the controller, your computer will then show up a disk of GuliKit.
3.Uncompress the firmware V1.1 and copy it to the disk of GuliKit,auto upgrading will then be completed in seconds before the controller have auto power off.

 

Note:Before the controller have auto power off, don't unplug the USB cable.
          If you want to stop upgrading during the process, just double click the mode button to shut down the controller. Controller will then quit upgrading mode when you turn it on again.

GuliKit    Download    GuliKit Elves Pro Controller NS19 V1.1 firmware
Date:2020-09-07 17:33